Services
Documented site conditions can help reduce rework and disputes.
Incomplete site records lead to rework, return visits and disputes. Each service below begins with the outcome it delivers, followed by the deliverables you receive.
General contractors & builders
Review visible conditions recorded at the time of capture.
Helps reduce return visits and disputes over existing conditions, with a handover record the owner can use. Five services, from existing conditions to final handover. Reference as-built plans are drawn from the scan for design and coordination; they are not certified or sealed drawings.
Existing Conditions
Reduce site uncertainty before design, estimating and renovation, and limit unforeseen conditions that lead to change orders.
When: Before design, estimating, pricing or demo
Deliverables
3D virtual tour link
Registered E57 point cloud with high-resolution panoramas
Dimensioned as-built floor plan (existing conditions) as DXF and PDF (11×17), reference only
Key measurements sheet (areas, ceiling heights), each value with its ± tolerance
Construction Progress
Resolve progress questions with a dated visual record of what was installed and when.
When: At schedule milestones and pay applications
Deliverables
Dated 3D virtual tour link per visit
PDF change notes against the last visit, with every item marked installed, absent or unknown
Preliminary floor surface map (on request)
Pre-Drywall / Before Close-Up
Retain a record of concealed services and framing after close-up, without opening finished walls.
When: Before drywall or ceilings close
Deliverables
3D virtual tour link
PDF index of wall faces and ceiling bays by room, date and drawing revision
Photo crops of services with reference dimensions
E57 point cloud
Fit-Out Coordination Review
Identify visible conflicts before fabrication and installation. Critical dimensions should still be confirmed on site.
When: Before a fabrication or installation release (millwork, fixtures, ceiling)
Deliverables
Scaled DXF elevation of one zone
Marked PDF for the release meeting
Issue list with photo crops (fits, conflicts, still to verify on site)
Sections through visible conflicts (on request)
Final Handover
Provide the owner with a navigable record of the completed space for operations, maintenance and future work.
When: At substantial completion and owner turnover
Deliverables
Final 3D virtual tour link
As-built record plan sheet as DXF and PDF (reference only)
E57 point cloud archive
Finishes and fixtures register as XLSX/CSV
Index of every visit on the job
Owners, brokers & insurers
A record of what was there, before anything happens.
After a loss, establishing what was there is often the most difficult step. A dated baseline means the claim starts from a documented record. For commercial spaces only: offices, retail, hospitality, industrial and other business premises.
Commercial Pre-Loss Baseline
A dated record of the space as it stands, on file before a loss occurs.
When: At policy placement or renewal, after a renovation, or at handover
Deliverables
Private 3D virtual tour link
E57 point cloud
Floor plan as PDF and DXF
Pre-loss report PDF covering key measurements, plan, photo views, orthophoto, wall elevations, finishes and fixed equipment, leasehold improvements, and limitations
Annual Update
Keep the record current so it reflects the space as it stands.
When: Each renewal or after a change
Deliverables
New dated 3D virtual tour beside the old one
Change list against the last baseline
Updated schedule
Contents & Equipment Schedule (add-on)
An item-by-item record of contents and equipment, prepared before it is needed.
When: With the baseline, for equipment-heavy sites
Deliverables
XLSX/CSV listing each item's room, photo crop and dimensions, plus nameplate close-ups
Tags in the 3D virtual tour
Make and model identified from nameplates where visible, with no dollar values, ready for your insurer, broker or adjuster
Post-Loss Capture
Document damage before cleanup, alongside the baseline, so the adjuster works from a dated record.
When: After a loss, before cleanup
Deliverables
Dated 3D virtual tour and E57 point cloud of the damage
Side-by-side comparison with the baseline
Files ready for the adjuster
Property managers
Documented conditions before the next tenant moves in.
Helps reduce site visits and surprises at turnover. Turnover records, a Fit-Out Readiness Pack for the next tenant's designer and GC, and a baseline of common areas that also serves the insurance file.
Unit Turnover Record
A dated condition record at each change of tenant, reducing move-out disputes.
When: At tenant move-out and move-in
Deliverables
Dated 3D virtual tour link
Condition notes PDF with photo references
Floor plan PDF with area
Fit-Out Readiness Pack
Provide the incoming tenant's designer and GC with documented existing conditions, reducing site visits for measurement.
When: Between tenants, when a unit is marketed or prepared for the next fit-out
Deliverables
As-built / existing conditions plan as DXF and PDF, reference only
E57 point cloud
3D virtual tour link
Constraints sheet (column grid, clear heights, visible services and shutoffs, demising walls) for the incoming tenant's designer and GC
Building Baseline
One record of common areas and building services that serves both management and the insurance file.
When: On acquisition, at a new management contract, or at renewal
Deliverables
Pre-loss baseline of common areas, lobbies and service rooms
Equipment register XLSX with nameplates
Dated 3D virtual tour
Every capture is a LiDAR scan saved as an E57 point cloud with high-resolution panoramas and a 3D virtual tour, with machine-assisted review, checked by a person before anything goes out.
Roles served
One shared record for the whole project team
A single capture serves each role on the project, reducing site walks, information requests and disputes over existing conditions.
Superintendent
Checks what was installed and when, and resolves questions about site conditions without a return visit.
Project manager
Has a dated progress record ready for meetings, pay applications and fabrication releases.
Architect
Starts design from documented existing conditions and reviews what was built before it is closed in.
Owner
Receives a navigable record of the completed space, with plans and a finishes register, at handover.
Insurer
Has a dated pre-loss baseline of the commercial space on file, and a clear comparison after a loss.
Property manager
Keeps condition records at each change of tenant and gives the next tenant’s team a starting point.
Scope and accuracy
Scope and limits of a scan
Clear limits keep the record useful. A LiDAR scan is a strong record of visible conditions; it is not a substitute for every measurement on site.
Visual documentation, not precision verification
The 3D virtual tour, panoramas and point cloud document what was visible on the day of capture. They are a dated visual record, not a precision check of the work.
Reference only, never pass/fail
Our deliverables are reference documentation. They are not engineering assessments or inspections, and we never give a pass/fail judgement on the work.
Measured values carry a ± tolerance
Every dimension we report is a measured value with its ± tolerance stated beside it, along with what limited the capture.
Verify on site where it matters
Before a fabrication release, or wherever a dimension is critical, we recommend on-site verification by the responsible trade. Our issue lists flag what still needs to be verified.
Documentation and reference records, not certified surveys, appraisals or valuations.
Hidden conditions are only recorded if they are visible at the time of capture. Preliminary floor surface maps and sections through visible conflicts are available on request, with their limits stated.
Establish the record before it is needed.
Share the site, the project stage and the information you need. We will reply with next steps and a proposed capture date.